Keltian Alat Transportasi

Kelompok Penelitian ini melakukan penelitian di bidang Alat Transportasi, Penelitian kendaraan ramah lingkungan (mobil listrik dan mobil hibrida). Sub penelitiannya yaitu penelitian motor bakar (internal combustion engine), khususnya yang terkait dengan pengujian prestasi, penyiapan campuran (mixture preparation and mixture formation), pertukaran gas (gas exchange), pembakaran, bahan bakar alternatif (gas, biodiesel), dan gas buang.

Kompetensi :

Kemampuan yang dimiliki oleh kelompok ini antara lain :

1. Pengujian prestasi :

Meliputi pengukuran torsi, daya, putaran, pemakaian udara, pemakaian bahan bakar, emisi gas buang pada motor bakar. Kami juga memiliki kemampuan membuat inertia chassis dynamometer untuk pengujian daya dan torsi sepeda motor.

2. Pengujian indikator (engine indicating) :

Meliputi pengukuran sudut engkol, tekanan di ruang bakar, tekanan di intake dan exhaust port, dan waktu injeksi. Analisis dilakukan terhadap tekanan, temperatur, Rate of Heat Released (ROHR), cycle-to-cycle variation.

3. Simulasi Motor Bakar :

Meliputi simulasi termodinamika siklus motor bakar dan Computational Fluid Dynamics untuk membandingkan beberapa konsep motor bakar maupun untuk membuat konsep baru yang berkaitan dengan pertukaran gas, penyiapan campuran, proses pembakaran, pembentukan gas buang, dan engine after-treatment.

4. Pembuatan Electronic Control Unit (ECU) :

Meliputi sistem kontrol untuk Diesel Common Rail Injection System dan Electronic Governor.

5. Setting dan Kalibrasi Sistem Kontrol Dinamometer Schenck.

Peralatan yang dimiliki :

  • Schenck Eddy-current dynamometer
  • Engine Indicating System
  • Piezo-electric pressure sensors
  • Hot wire anemometer
  • AVL Fuel Balance
  • AVL Engine and Oil Cooling System
  • Diesel and Gasoline Single Cylinder Research Engine
  • AVL BOOST Engine Cylce and Gas Exchange Simulation Software
  • AVL FIRE CFD code
  • Diesel Smoke Meter, NOx meter
  • Digital Storage Oscilloscope, Function Generator, Micro-controller kit

 

Kerjasama dan layanan :

    1. PT Boneo
    2. PT PLN

 

SDM Kelompok Penelitian Peralatan Transportasi
  1. Dr. Widodo Budi Santoso
  2. Ir. Abdul Hapid
  3. Achmad Praptijanto, M.T.
  4. Aam Muharam, M.T.
  5. Arifin Nur, M.T.
  6. Sunarto Kaleg, S.T.
  7. Amin, M.T.
  8. Naili Huda, M.Eng.Sc.
  9. Muhammad Redho Kurnia, S.Sn.
  10. Dr. Kadek Heri Sanjaya
  11. Bambang Wahono, M.Eng.
  12. Yanuandri Putrasari, M.Eng.
  13. Latif Rozaqi, S.T.
  14. Asep Nugroho, M.T.
  15. Yukhi Mustaqim Kusuma Sya Bana, S. Ds.
  16. Muhammad Khristamto Aditya Wardana, S.T.
  17. Suherman, S.T.

 

Publikasi Hasil Penelitian [Tahun 2016]

  • Bambang Wahono, Arifin Nur, Widodo Budi Santoso, Achmad Praptijanto, “A comparison study of range-extended engines for electric vehicle based on vehicle simulator”, Journal of Mechanical Engineering and Sciences (JMES) ISSN (Print): 2289-4659; e-ISSN: 2231-8380 Volume 10, Issue 1, pp. 1803-1816, June 2016, DOI:http://dx.doi.org/10.15282/jmes.10.1.2016.5.0173, ISSN (Print): 2289-4659; e-ISSN: 2231-8380.
  • Bambang Wahono, Arifin Nur, Achmad Praptijanto, Widodo Budi Santoso, Suherman Suherman, Zong Lu, “Fuel consumption and CO2 emission investigation of range extender with diesel and gasoline engine”, Journal of Mechatronics, Electrical Power, and Vehicular Technology Vol 7, No 2 (2016), DOI: 14203/j.mev.2016.v7.87-92, e-ISSN:2088-6985; p-ISSN: 2087-3379.
  • Kadek Heri Sanjaya, Soomin Lee, Tetsuo Katsuura, “Review on the application of physiological and biomechanical measurement methods in driving fatigue detection”, Journal of Mechatronics, Electrical Power, and Vehicular Technology, Vol. 07, 2016, 35-48, DOI: 14203/j.mev.2016.v7.35-48, e-ISSN:2088-6985, p-ISSN: 2087-3379
  • Yanuandri Putrasari, Achmad Praptijanto, Widodo Budi Santoso, Ocktaeck Lim, “Resources, policy, and research activities of biofuel in Indonesia: A review”, Energy Reports 2, 2016, 237–245,
    DOI: http://dx.doi.org/10.1016/j.egyr.2016.08.005, ISSN: 2352-4847.
  • Kristian Ismail, “Implementasi Teknologi Informasi Pada Bisnis Clothing dan Distro”, Sistemik – Jurnal Ilmiah Nasional Bidang Ilmu Teknik, ISSN: 2337-3636.
  • Sunarto Kaleg, Amin, “1P15S Lithium Battery Pack: Aluminum 5052-0 Strength of Material Analysis and Optimization”, ICSEEA 2016, 5 halaman.
  • Suherman, Bambang Wahono, Achmad Praptijanto, Widodo Budi Santoso, Arifin Nur, “Modeling and Static Analysis of a Connecting Rod in Range Extender Engine”, 5 halaman, Icseea 2016 IEEE Conference Publication.
  • Yukhi Mustaqim Kusuma Sya’bana, Kadek Heri Sanjaya, “Camouflage Design and Head Measurement Characteristic of Indonesian Armoured Vehicle Helmet”, AIP, 8 halaman.
  • Aam Muharam, Mulia Pratama, Kristian Ismail, Sunarto Kaleg, Muhammad Redho Kurnia, Abdul Hapid, “A Development of Smart Metering Infrastructure for Electric Vehicle Charging Point”, 7 halaman, International Conference on Sustainable Energy Engineering and Applications.
  • Asep Nugroho, Rifa Rahmayanti, Estiko Rijanto, F Danang Wijaya, “Telaah Topologi Konverter DC-DC untuk Nano DC Grid”, Prosiding Paper Konferensi Smart Grid Indonesia/28-29/Juli 2016/hal. 342-348.
  • Latif Rozaqi, Estiko Rijanto, “SOC Estimation for Li-Ion Battery Using Optimum RLS Method Based on Genetic Algorithm”, IEEE Xplore, ISSN:978-1-5090-4139-8.
  • Achmad Praptijanto, Widodo Budi Santoso, Arifin Nur, Bambang Wahono, Suherman, “Effect of Exhaust Gas Recirculation on Homogeneous Charge Compression Ignition Combustion Model in Diesel Engine”, ICSEEA 2016, IEEE Conference Publication.

 

 

Publikasi Hasil Penelitian [Tahun 2015]

  • Bambang Wahono, Kristian Ismail, Harutoshi Ogai, “Prediction Model of Battery State of Charge and Control Parameter Optimization for Electric Vehicle”, Journal of Mechatronics, Electrical Power, and Vehicular Technology, Vol. 06, No. 1, pp: 31-38, DOI: 10.14203/j.mev.2015.v6.39-48, e-ISSN 2088-6985, p-ISSN 2087-3379
  • Naili Huda, Kim Peter Hassall, Sunarto Kaleg, Abdul Hapid, “Economic Valuation of Hypothetical Paratransit Retrofitting”, Journal of Mechatronics, Electrical Power, and Vehicular Technology, Vol. 06, No. 1, pp: 49-56, DOI: 10.14203/j.mev.2015.v6.39-48, e-ISSN 2088-6985, p-ISSN 2087-3379
  • Latif Rozaqi, Estiko Rijanto, “Analysis of Braking Dynamics using Linearized Quarter Vehicle Model”, Jurnal Teknologi Indonesia, 2015, Vol.38, No.3, (Available online: December 2015), ISSN: 2303-1913
  • Naili Huda, Kim Peter Hassall, Aam Muharam, Kristian Ismail, “Estimating Power Needed to Fuel Electric Paratransits in Bandung”, Journal of Mechatronics, Electrical Power, and Vehicular Technology, Vol.6, No.2, 2015, pp.123-128
  • Yanuandri Putrasari, Achmad Praptijanto, Arifin Nur, Bambang Wahono, Widodo Budi Santoso, “Evaluation of Performance and Emission of SI Engine Fuelled with CNG at Low and High Load Condition”, Energy Procedia, April 2015, Vol. 68, pp. 147-156. DOI: 10.1016/j.egypro.2015.03.243, ISSN: 1876-6102
  • Arifin Nur, Y. Putrasari, W.B. Santoso, Tony Kosasih, I.K. Reksowardojo, “Performance Characteristic of Indirect Diesel Engine Fuelled with Diesel-Bioethanol Using Uniplot Software”, Energy Procedia, April 2015, Vol. 68, pp. 167-176. DOI: 10.1016/j.egypro.2015.03.245, ISSN: 1876-6102
  • Kristian Ismail, Aam Muharam, Mulia Pratama, “Design of CAN Bus for Research Application Purpose Hybrid Electric Vehicle Using ARM Microcontroller”, Energy Procedia, April 2015, Vol. 68, pp. 288-296. DOI: 10.1016/j.egypro.2015.03.256, ISSN: 1876-6102
  • Achmad Praptijanto, Aam Muharam, Arifin Nur, Yanuandri Putrasari, “Effect of Ethanol Percentage for Diesel Engine Performance Using Virtual Engine Simulation Tool”, Energy Procedia, April 2015, Vol. 68, pp. 345-354. DOI: 10.1016/j.egypro.2015.03.265, ISSN: 1876-6102
  • Bambang Wahono, Widodo Budi Santoso, Arifin Nur, Amin, “Analysis of Range Extender Electric Vehicle Performance Using Vehicle Simulation”, Energy Procedia, April 2015, Vol. 68, pp. 409-418. DOI: 10.1016/j.egypro.2015.03.272, ISSN: 1876-6102
  • Sunarto Kaleg, Abdul Hapid, M. Redho Kurnia, “Electric Vehicle Conversion Based in Distance, Speed, and Cost Requirement”, Energy Procedia, April 2015, Vol. 68, pp. 446-454. DOI: 10.1016/j.egypro.2015.03.276, ISSN: 1876-6102
  • Muhammad Khristamto, Achmad Praptijanto, Sunarto Kaleg, “Measuring Geometric and Kinematic Properties to Design Steering Axis to Angle Turn of The Electric Golf Car”, Energy Procedia, April 2015, Vol. 68, pp. 463-470. DOI: 10.1016/j.egypro.2015.03.278, ISSN: 1876-6102
  • Achmad Praptijanto, Egi Agustian, Yanuandri Putrasari, Darwin Sebayang, Anika Zafiah M. Rus, Sulaiman Hasan, Pudji Untoro, “Sonochemistry Approach to Reducing Biodiesel Reaction Time From Jatropha Curcas Oil by Clamp On Tubular Reactor”, Energy Procedia, April 2015, Vol. 68, pp. 480-489. DOI: 10.1016/j.egypro.2015.03.280, ISSN: 1876-6102
  • M. Redho Kurnia, “Angkot Design Modification Based on Convertion From Conventional Engine to Electrical Drive”, Energy Procedia, April 2015, Vol. 68, ISSN: 1876-6102
  • Sunarto Kaleg, “Performing on Electric Vehicle Convertion”, Energy Procedia, April 2015, Vol. 68, ISSN: 1876-6102
  • M. Redho Kurnia, “Passanger Interior Cabin Design of Executive Mobile Meeting Microbus”, Energy Procedia, April 2015, Vol. 68, ISSN: 1876-6102
  • Asep Nugroho, Estiko Rijanto, F.Danang Wijaya, Prapto Nugroho, “Battery State of Charge Estimation by Using a Combination of Coulomb Counting and Dynamic Model With Adjusted Gain”, Third Internatioanl Conference on Sustainable Energi Engineering and Application (ICSEEA), Bandung, Okt 5-7, 2015. IEEE Proceeding
  • Yanuandri Putrasari, Arifin Nur, Achmad Praptijanto, and Aam Muharam, “Heat Release Analysis of a Two Cylinders DI Diesel Engine Fuelled With Ethanol-Diesel Blends”, The Proceeding of ASEAN Conference on Science and Technology 2014 – 9th ASEAN Science and Technology Week (ASTW-9)
  • Kristian Ismail, Aam Muharam, Amin and Widodo Budi Santoso, “Design of Single Phase Inverter Using Microcontroller Assisted by Data Processing Applications Software”, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) 18–19 August 2015, Kuantan, Pahang, Malaysia
  • Fajar Budi Utomo, Asep Nugroho, Novan Agung Mahardiono, “Implementasi Parasitic Mosfet Pada Sistem Charging”, Pertemuan dan Presentasi Ilmiah Kalibrasi, Intrumentasi, dan Metrologi ke-41 (KIM-LIPI)
  • Kadek Heri Sanjaya, Soomin Lee, Yoshihiro Shimomura, Tetsuo Katsuura, “The correlation between bilateral anthropometry discrepancy and asymmetrical locomotion during walking on a treadmill”, Proceedings of the 12th International Congress of Physiological Anthropology, pp 58-59
  • Kadek Heri Sanjaya, Yoshihiro Shimomura, Tetsuo Katsuura, “The Role of Physiological Anthropology in Product Design: Laterality during Locomotion and Its Prospects in Design”, Proceedings of the 3rd ICCI 2015, pp 117-124
  • Kristian Ismail, Diana Rahayuningwulan, “Design of timing series connection technique to collecting power from microbial fuel cell using capacitor”, Proceeding of 2nd International Conference on Sustainable Energy Engineering and Application Grand Hotel Preanger, Bandung, Indonesia 14 – 15 October 2014

 

Publikasi Hasil Penelitian  [Tahun 2014]

  • Yanuandri Putrasari, Arifin Nur, Aam Muharam, “Uji Prestasi Mesin Dual Fuel Menggunakan Diesel Etanol”, Widyariset, 2013, 16 pp. 259-267. ISSN: 1411-7932
  • Syamsu Ismail, Kristian Ismail, “Air Sebagai Media Transmisi Komunikasi dan Pertukaran Informasi di Danau Buatan dan di Daerah Laut Antar Pulau di Indonesia”, Jurnal Sistemik. ISSN: 2337-3636
  • Kristian Ismail, Aam Muharam, “Konverter Tegangan Jala-jala Satu Fasa ke Tiga Fasa”, Jurnal Sistemik. ISSN: 2337-3636
  • Amin, Riyanto T. Bambang, Arief Syaichu R., Cees Jan Dronkers, Romeo Ortega, Arif Sasongko, “Energy Management of Fuel Cell/Battery/Supercapacitor Hybrid Power Sources Using Model Predictive Control”, IEEE Transactions on Industrial Informatics, 2014, Issue: 4, Vol. 10, pp.1992– 2002. DOI: 10.1109/TII.2014.2333873, ISSN: 1551-3203
  • Bambang Wahono, Harutoshi Ogai, “Combustion Model and Control Parameter Optimization Methods for Single Cylinder Diesel Engine”, Journal of Optimization, vol. 2014, Article ID 135163, pp. 1-9, DOI: http://dx.doi.org/10.1155/2014/135163, ISSN: 2356-752X (Print), ISSN: 2314-6486 (Online)
  • Yanuandri Putrasari, Haznan Abimanyu, Achmad Praptijanto, Arifin Nur, Yan Irawan, Sabar Pangihutan Simanungkalit, ”Experimental Investigation of 2nd Generation Bioethanol Derived from Empty-Fruit-Bunch (EFB) of Oil-Palm on Performance and Exhaust Emission of SI Engine”, Journal of Mechatronics, Electrical Power, and Vehicular Technology, Vol 5, No 1,  pp. 9-16.DOI : 10.14203/j.mev.2014.v5.09-16, e-ISSN 2088-6985, p-ISSN 2087-3379
  • Sunarto Kaleg, Aam Muharam, Muhammad Redho Kurnia, Abdul Hapid, “Evaluation of Potential Usage of Incremental-Type Rotary Encoder Application for Angle Sensing in Steering System”, Journal of Mechatronics, Electrical Power, and Vehicular Technology, Vol 5, No 2,e-ISSN 2088-6985, p-ISSN 2087-3379
  • Yanuandri Putrasari, Arifin Nur, Achmad Praptijanto, Aam Muharam, “Heat Release Analysis of a Two Cylinders DI Diesel Engine Fuelled with Ethanol-Diesel Blends”. ASEAN Committee on Science and Technology (COST) 2014. ISBN: 978-979-799-812-7

 

Publikasi Hasil Penelitian  [Tahun 2013]

  • Yanuandri Putrasari, Arifin Nur, Aam Muharam;The Influence of Two Cylinder Diesel Engine Modification (IDI to DI) on the Performance and Its Emission”, Journal of Mechatronics, Electrical Power, and Vehicular Technology, Vol 4, No 1 (2013), e-ISSN 2088-6985, p-ISSN 2087-3379, July 2013
  • Bambang Wahono, Wang Xiaoli, Harutoshi Ogai, “Combustion Property Analysis and Control System for the Dynamics of a Single Cylinder Diesel Engine”
  • Kristian Ismail, Aam Muharam, Amin, “Perancangan Kontrol Suhu dan Level Air pada Tangki dengan Antarmuka Komputer Menggunakan Programmable Peripheral Interface“, Prosiding RIMTEK 2013, ISBN 978-602-17952-0-0
  • Aam Muharam, Kristian Ismail, “Perancangan Sistem Kontrol Injeksi Bahan Bakar Ethanol dengan Model Fumigasi (Separated Injection) Pada Motor Bakar Diesel”, Prosiding RIMTEK 2013, ISBN 978-602-17952-0-0
  • Bambang Wahono, Wang Xiaoli, Harutoshi Ogai, “Eksperimen dan Analisis Transien Mesin Diesel Menggunakan Model Predictive Control“, Prosiding RIMTEK 2013, ISBN 978-602-17952-0-0
  • Yanuandri Putrasari, Achmad Praptijanto, Arifin Nur, Ahmad Dimyani, Mulia Pratama, “Studi Pendahuluan Performa dan Emisi Mesin Bensin dengan Bahan Bakar CNG Menggunakan Konverter Kit Komersial“, Prosiding RIMTEK 2013, ISBN 978-602-17952-0-0
  • Arifin Nur, Y. Putrasari, A. Muharam, A. Dimyani, M. Pratama, “Pengaruh Penambahan Bioethanol pada Solar Terhadap Emisi Motor Diesel Common Rail“, Prosiding RIMTEK 2013, ISBN 978-602-17952-0-0
  • Muhammad Redho Kurnia, Sunarto Kaleg, Abdul Hapid, “Desain Eksterior dan Interior Sedan Listrik LIPI Ditinjau dari Perupaan dan Estetika“, Prosiding RIMTEK 2013, ISBN 978-602-17952-0-0
  • Muhammad Redho Kurnia, Sunarto Kaleg, Abdul Hapid, “Proses Desain Interior Ruang Penumpang Microbus Listrik Executive Mobile Meeting“, Prosiding RIMTEK 2013, ISBN 978-602-17952-0-0
  • W.B. Santoso, R.A. Bakar, A. Nur, “Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine at Low Load”, Energy Procedia, Vol. 32, page 3-10, May 2013, ISSN 1876-6102
  • Yanuandri Putrasari, Arifin Nur, Aam Muharam, “Performance and emission characteristic on a two cylinder DI diesel engine fuelled with ethanol-diesel blends”, Energy Procedia, Vol.32, page 21-30, May 2013, ISSN 1876-6102
  • Bagus A. Nugroho, Bambang Sugiarto, Prawoto, Widodo B. Santoso, “Multidimensional modeling of diesel dual fuel combustion”, Proceeding of International Conference on Sustainable Energy Engineering and Application, Inna Garuda Hotel, Yogyakarta, Indonesia, 6–8 November 2012, page 107-111, ISBN 978-602-18167-0-7, April 2013

 

Publikasi Hasil Penelitian  [Tahun 2012]

  • Amin, B. R. Trilaksono, A. Sasongko, A. S. Rohman, C. J. Dronkers, R. Ortega, “Model Predictive Control of Hybrid Fuel Cell/Battery/Supercapacitor Power Sources”, International Conference on System Engineering and Technology, Bandung, 2012 (pdf)
  • A. Nur, Y.Putrasari, I.K.Reksowardojo, “The Effect of Ethanol-Diesel Blends on The Performance of A Direct Injection Diesel Engine”, Journal of Mechatronics, Electrical Power, and Vehicular Technology (Journal MEV), Vol. 03 No.01, ISSN 2087-3379, Bandung, 2012 (pdf)
  • K.Ismail, S.Ismail, “Development of Discrete Power Supply with Charge Pump Method for High Powered Sonar System”, Journal of Mechatronics, Electrical Power, and Vehicular Technology (Journal MEV), Vol. 03 No.01, ISSN 2087-3379, Bandung, 2012 (pdf)
  • M.Z.Romdlony, Amin, “Design and Implementation of Anti-windup PI Control on DC-DC Bidirectional Converter for Hybrid Vehicle Applications”, Journal of Mechatronics, Electrical Power, and Vehicular Technology (Journal MEV), Vol. 03 No.01, ISSN 2087-3379, Bandung, 2012 (pdf)

 

Publikasi Hasil Penelitian [Tahun 2011]


Publikasi Hasil Penelitian  [Tahun 2010]

  • K. Ismail, A. Muharam, Amin, S. Kaleg, “Desain Test Vehicle Untuk Sistem Manajemen Energi Kendaraan Hibrida Seri”, Prosiding Seminar Nasional SMART, ISBN: 978-602-97567-4-6, Yogyakarta, 2010 (pdf)
  • M. R. Kurnia, “Rancang Bangun Prototipe Troli Listrik Untuk Rumah Sakit”, Prosiding Seminar Nasional Pengkajian & Penerapan Teknologi Industri (SNPPTI 2010), Jakarta, 2010 (pdf)
  • M. R. Kurnia, S. Kaleg, A. Hapid, “Pengembangan Proses Desain Bodi Mobil Hibrid LIPI”, Prosiding Seminar Nasional Pengkajian & Penerapan Teknologi Industri (SNPPTI 2010), Jakarta, 2010 (pdf)
  • Y. Putrasari, P. Untoro, S. Hasan, N. Huda, D. Sebayang, “Modification of Surface Roughness and Area of FeCrAl Substrate for Catalytic Converter Using Ultrasonic Treatment”, Journal of Mechatronics, Electrical Power, and Vehicular Technology (Journal MEV), Vol. 01 No.02, ISSN 2087-3379, Bandung, 2010 (pdf)

 

Publikasi Hasil Penelitian [Tahun 2009]

  • A. Muharam, A. Praptijanto, W. B. Santoso, “Electronic Control Unit for Multiple Injection Method on Diesel Engine using 8-Bit Microcontroller”, Jurnal Elektronika dan Telekomunikasi, Vol. 9 No. 2, pp 1 – 7, ISSN: 1411 – 8289, Bandung, 2009 (pdf)
  • K. Ismail, A. Muharam, Amin, S. Ismail, “Rancang Bangun Interfacing Universal I/O RS232 Menggunakan Mikrokontroler”, Jurnal Elektronika dan Telekomunikasi, Vol. 9 No. 2, pp 213 – 217, ISSN: 1411 – 8289, Bandung, 2009 (pdf)
  • A. Muharam, W. B. Santoso, A. Praptijanto, “Algoritma Kendali Sistem Pengisian Tabung Bahan Bakar Untuk Aplikasi Generator Dengan Konsep Dual Fuel”, Prosiding Digital Information and System Conference, ISBN 978-979-1194-11-2, Bandung, 2009 (pdf)
  • Amin, K. Ismail, P. Widianto, “Rancang Bangun Alat Pengujian Sederhana Speed Control untuk Mobil Listrik”, Prosiding Seminar Teknik Mesin 4, Surabaya, 2009 (pdf)
  • Amin, K. Ismail, B. Wahono, “Optimasi Frequency Switching Speed Control untuk Mobil Listrik”, Prosiding Digital Information and System Conference, ISBN 978-979-1194-11-2, Bandung, 2009 (pdf)
  • A. Nur, W. B. Santoso, “Karakterisasi dan Kajian Tekno Ekonomi Motor Diesel Dual Fuel (Solar-CNG)”, Prosiding Seminar Nasional TEKNOIN, ISBN 978-979-96964-6-5, Yogyakarta, 2009 (pdf)
  • K. Ismail, B. Wahono, Amin, “Analisa Kinerja Aki dengan Menggunakan Simulasi Sistem Manajemen Energi pada Kendaraan Hibrida”, Prosiding Seminar Nasional Teknologi Simulasi (TEKNOSIM), ISBN 978-602-8125-51-2, Yogyakarta, 2009 (pdf)

 

Publikasi Hasil Penelitian [Tahun 2008]

  • A. Muharam, A. Praptijanto, B. Susanto, “Sistem Manajemen Bahan Bakar Pada Diesel Dengan Sistem Injeksi Common Berbasis Mikrokontroler”, Prosiding Seminar Teknik Mesin 3, ISBN 978-979-25-4412-1, Surabaya, 2008 (pdf)
  • A. Muharam, “Perancangan Sistem Kontrol Injeksi Multipoin Untuk Efisiensi Pembakaran Pada Motor Bakar”, Prosiding Seminar Teknik Mesin 3, ISBN 978-979-25-4412-1, Surabaya, 2008 (pdf)
  • S. Kaleg, A. Muharam, A. Hapid, “Sebaran Beban Rol Berongga Pada Dinamometer Sasis Kendaraan”, Prosiding Seminar Pemaparan Hasil Penelitian dan Pengembangan Kedeputian IPT LIPI, ISBN 9-793-68886-6, Bandung, 2008 (pdf)
  • A. Praptijanto, A. Saepudin, A. Muharam, Wuryaningsih, “Reduksi Emisi NOx Pada Motor Diesel Berbahan Bakar Biodiesel Dengan Metode Injeksi Ganda”, Prosiding Seminar Pemaparan Hasil Penelitian dan Pengembangan Kedeputian IPT LIPI, ISBN 9-793-68886-6, Bandung, 2008 (pdf)
  • Amin, K. Ismail, “Sistem Pengisian Aki dengan Metode Charge Pump”, Prosiding Seminar Teknik Mesin 3, ISBN 978-979-25-4412-1, Surabaya, 2008 (pdf)
  • A. Nur, A. Saepudin, “Metode Penurunan Emisi Gas Buang Pada Motor Diesel Konvensional”, Prosiding Seminar Pemaparan Hasil Penelitian dan Pengembangan Kedeputian IPT LIPI, ISBN 9-793-68886-6, Bandung, 2008 (pdf)
  • A. Nur, W.B. Santoso, “Pengaruh pergeseran waktu Injeksi Terhadap Performa dan Opasitas Motor Diesel”, Prosiding Seminar Teknik Mesin 3, ISBN 978-979-25-4412-1, Surabaya, 2008 (pdf)
  • W. B. Santoso, A. Nur., A. Praptijanto, “Analisis Proses Pembakaran Pada Motor Diesel Dengan Off-line Combustion Analizer”, Prosiding Seminar Nasional Teknologi Simulasi (TEKNOSIM), ISBN 978-979-18703-0-6, Yogyakarta, 2008 (pdf)
  • A. Nur, “Analisa Pengaruh Tekanan Injeksi Bahan Bakar Pada Motor Diesel Konvensional”, Prosiding Seminar Nasional VII Rekayasa dan Aplikasi Teknik Mesin di Industri, ISSN 1693 – 3168, Bandung, 2008
  • A. Nur, W.B. Santoso, “Analisa Laju Pelepasan Panas Terhadap Perubahan Tekanan Injeksi Bahan Bakar Motor Diesel”, Prosiding Seminar Nasional TEKNOIN, ISBN 978-979-3980-15-7, Yogyakarta, 2008 (pdf)
  • M. R. Kurnia, K.H. Sanjaya, “Proses Pembuatan Rangka Dalam Pemodelan Produk Secara Konvensional”, Prosiding Seminar Teknik Mesin 3, ISBN 978-979-25-4412-1, Surabaya, 2008 (pdf)
  • K.H. Sanjaya, S. Kaleg, M.R. Kurnia, “Kajian Metode Rancang Bangun Prototipe Mobil Hibrid Seri”, Prosiding Seminar Teknik Mesin 3, ISBN 978-979-25-4412-1, Surabaya, 2008 (pdf)
  • K.H. Sanjaya, S. Kaleg, M. R. Kurnia, “Penentuan Dimensi Purwarupa Mobil Hibrida Seri Tipe Mobil Kota”, Prosiding Seminar on Application and Research in Industrial Technology SMART, Yogyakarta, 2008 (pdf)
  • M.R. Kurnia, Kadek Heri S, Sunarto K., “Studi Aktivitas Pengemudi Terhadap Rancang Bangun Mobil Hibrid Seri”, Prosiding Seminar on Application and Research in Industrial Technology SMART, Yogyakarta, 2008 (pdf)

 

Publikasi Hasil Penelitian [Tahun 2007]

  • A. Praptijanto, A. Muharam, W.B. Santoso, “Simulasi Termodinamika Performance Motor Diesel 1 Silinder 677 Cc Dengan Menggunakan Campuran Bahan Bakar Metil Butanoate Dan Solar”, Prosiding Seminar Nasional Sains dan Teknologi, ISBN 978-979-15535-2-0, Lampung, 2007 (pdf)
  • A. Nur, A. Saepudin, A. Praptijanto, W.B. Santoso, “Menurunkan Emisi NOx Pada Mesin Diesel Dengan Metode Exhaust Gas Recirculation (EGR)”, Prosiding Seminar Teknik Mesin 2, ISBN 978-979-25-4411-4, Surabaya, 2007 (pdf)
  • W.B. Santoso, A. Praptijanto., A. Nur, “Simulasi Thermodinamika Proses Pembakaran Pada Motor Diesel Berbahan Bakar Ganda Solar-CNG”, Prosiding Seminar Teknik Mesin 2, ISBN 978-979-25-4411-4, Surabaya, 2007 (pdf)
  • K.H. Sanjaya, M.R. Kurnia, “Identifikasi Aspek Ergonomi dalam Angkutan Umum Dalam Kota”, Prosiding Seminar Nasional Ergonomi Integrasi Ergonomi di Dalam Product Developement, Bandung, 2007 (pdf)
  • M.R. Kurnia, K.H. Sanjaya, Masrah, “Perkembangan Desain Dashboard Mobil Golf Listrik MARLIP-LIPI”, Prosiding Seminar Nasional Ergonomi Integrasi Ergonomi di Dalam Product Developement, Bandung, 2007 (pdf)
  • K.H. Sanjaya, S. Kaleg, A. Hapid, M.R. Kurnia, “Series Hybrid Vehicle Design Development as a City Car”, Proceeding The 3rd International Conference on Product Design and Development 2007, Yogyakarta, 2007 (pdf)
  • S. Kaleg, A. Hapid, K.H. Sanjaya, M.R. Kurnia, “Lead Acid Battery Pack Design for Hybrid Car”, Proceeding The 3rd International Conference on Product Design and Development 2007, Yogyakarta, 2007 (pdf)

 

Publikasi Hasil Penelitian [Tahun 2006]

  • A. Muharam, A. Praptijanto, “Sistem Kontrol Common Rail Injection Untuk Reduksi Emisi pada Motor Diesel Satu Silinder”, Prosiding Seminar Nasional Tenaga Listrik dan Mekatronik, ISBN 979-26-2441-4, Bandung, 2006 (pdf)
  • W.B. Santoso, A. Praptijanto, A. Nur, “Studi Pengaruh CNG Ratio Pada Motor Diesel Berbahan Bakar Ganda Solar-BBG”,Jurnal Teknik Mesin UDAYANA, ISSN 1907-7467, Bali, 2006 (pdf)
  • A. Nur, W.B. Santoso, “Karakteristik Performa Mesin Berbahan-bakar Bensin-Etanol”, Prosiding Seminar Nasional Tenaga Listrik dan Mekatronik, ISBN 979-26-2441-4, Bandung, 2006 (pdf)
  • W.B. Santoso, A. Nur, A. Praptijanto, “Pengaruh CNG-Ratio Terhadap Proses Pembakaran dan Emisi Gas Buang Pada Motor Diesel Berbahan Bakar Ganda Solar-CNG”, Prosiding Seminar Nasional Tenaga Listrik dan Mekatronik, ISBN 979-26-2441-4, Bandung, 2006 (pdf)